Vehicle Graphics, Decals & Wrapping

Vehicle graphics, decals & wrapping is one of the most cost effective ways to market your business, promote your brand and make a Statement.

The key marketing strategy for any business is to get noticed by potential customers. Wrapping your vehicles with your brand not only strenghtens your image but is also an excellent way to tell the world you’re here!

Present your message with style and professionalism. Advantages: Wrapping a vehicle in vinyl allows you to apply any image or message to create a spectacular billboard. It will also protects the original paintwork from scratches, key marks, stone chips and light scuffs.

Best of all when you decide to trade in your vehicle the vinyl can be removed, leaving you with a good as new vehicle.

Remember… On average a vehicle signs are seen by over 3000* people per hour* (number quoted was supplied by an independent survey commissioned by 3M)

the Vinyl Vehicle graphics, decals & wrapping is one of the most cost effective ways to market your business!

At Huk Group We offer part & full vehicle wrapping.

Our designers are ready to:

Create your logo or incorporate your existing logo into the design.

Change the whole colour of your vehicle.

Put text & photos to promote your business.

For more information and prices contact us our Nuneaton Studio today.

CARE GUIDE – Vinyl Wrap

To ensure that our product performs for as long as possible, follow these instructions below:

- Do not wash for the first Week after installation.
Try to wash your wrapped car regularly preferably by hand, just like you would a nice paint job.
Hand Wash – Wash whenever the car appears dirty. Contaminants allowed to remain on the vehicle wrap may be more difficult to remove during cleaning.
- Rinse off as much dirt and grit as possible with a spray of water.
- Use a wet, non-abrasive detergent such and a soft, clean cloth or sponge.
- Rinse thoroughly with clean water. To reduce water spotting, immediately use a silicone squeegee to remove water and finish with a clean microfiber cloth.
Automated Car Washes – Use touchless car washes (car wash using water jets only without brushes) if you don’t have time for a hand-wash. Brush-type car washes are not recommended as they can scratch the film, cause edges to lift or chip, and dull the film’s appearance.
Pressure Washing – Although hand washing is the preferred cleaning method, pressure washing may be used under these conditions
(We do not recommend the use of a pressure washer and we cannot cover any issues that result from using it)
- Ensure the water pressure is kept below 2000 psi (14 MPa).
- Keep water temperature below 80°C (180°F).
- Check the outdoor temperature is between 10°C – 50°C
- Use a spray nozzle with a 40+ degree wide angle spray pattern.
- Keep the nozzle at least 1 foot (300 mm) away from and perpendicular (at 90 degrees) to the graphic.
- Important Note! Holding the nozzle of a pressure washer at an angle to the graphic may lift the edges of the film.
Difficult Contaminants – Soften difficult contaminants such as bug splatter, bird droppings, tree sap and similar contaminants by soaking them for several minutes with very hot, soapy water. Rinse thoroughly and dry. Spot clean the contaminants. Do not use rough scrubbing, dirty or abrasive tools, which will scratch the film. Wash and rinse off all residue immediately.
Fuel Spills – Wipe off immediately to avoid degrading the vinyl and adhesive. Then wash, rinse and dry as soon as possible.
Film Restoration – The following restoration recommendations will help keep your vehicle wraps looking their best.
- Avoid automated car washes when possible
- Do not use any abrasive polishes or cutting compounds
- Do not use any polishing or wax products on matte or textured films
- If there is wax or wax residue on the surface, remove with an all-purpose cleaner
- Before using cleaning products, always test and approve in an inconspicuous area